Sometimes the problem can be a lack of battery power. Here’s how to check if your device is fully charged.
- Press the button on your IQOS 3 MULTI until you see the battery lights at the bottom. If they don’t turn on, press and hold the button for four seconds until you see the small light turn on. The battery lights should stay on when you press the button again.
- If you’re not seeing any lights, then charge your IQOS 3 MULTI by closing the lid and using the official IQOS AC Power Adaptor and cable for at least twenty minutes. However, to get your device brimming with power, we recommend your charge it up for seventy-five minutes.
- You’ll be able to tell when your device is fully charged because the battery status lights will turn off.
We’re all connected to different devices these days, so charging your device through your laptop is a handy way of making sure you have full power. But it’s useful to bear in mind that USB ports don’t offer the same level of power as an electrical outlet, so we’d always recommend the latter.
If your IQOS 3 MULTI is fully charged but still not working, then the next step is to reset it.
Press and hold the button on your charger for approximately 10 seconds. When the lights start to fade, keep the button pressed for two more seconds. As you release the button, you’ll see all the lights flash white.
Our cleaning tool and cleaning sticks are the best way to get your device pristine.
A regular clean with the right tools prevents problems, but best of all, it makes sure you’re getting the IQOS experience you expect.
You could have some residual tobacco stuck in your device. To clear it, remove the cap and use a cleaning stick to start to clean the flat surface next to the heating chamber, as well as the inside of the cap. Once you’ve done all that, your device should be clean and ready to go.
Your IQOS 3 MULTI operates in a temperature range between 0° and 50° C. If the temperature goes too high or too low, then you might see a red light on your IQOS 3 MULTI Pocket Charger, or a double flash when you press it.
If you think your device is too hot, take it to a colder spot and allow it to cool down. If you think your device is too cold, try warming it in between your hands for a minute or so.
It’s possible your device could have a broken blade or some other physical damage. The blade can break if you use too much force when cleaning the holder, so make sure you clean with gentle fingers. And when inserting a heated tobacco unit, avoid twisting it.
If either of these things happen to you, then we want to get your device up and running again as soon as we can. Our Customer Care team will walk you through the steps needed to make sure you’re not without your IQOS device for long.
There are several ways you can reach us.
Live chat
Chat with our IQOS experts in real time.
Available every day from 9AM to 9PM (1h less in Canary Islands)
Send us your questions and we will get back to you.
Available every day from 9AM to 9PM (1h less in Canary Islands)
Our Twitter account is always available for you.
Available every day from 9AM to 9PM (1h less in Canary Islands)
We will get back to you as soon as possible.
Available Mondays to Fridays from 9AM to 9PM and Weekends from 9AM to 6PM (1h less in Canary Islands)
An IQOS coach is waiting to give you the answers you need.
Available Mondays to Fridays from 9AM to 9PM and Weekends from 9AM to 6PM (1h less in Canary Islands)